Deli ET314 Comb Binding Machine in Kenya

The Deli ET314 Binding machine price is KES 23,000. It is a manual A4 comb binding machine with complete metal split construction. It handles 25 sheets of 70g paper every cycle and binds documents up to 450 sheets thick using conventional plastic comb rings. Deli ET314 has 21 holes with a 14.3mm pitch for the standard A4 binding format, a double handle mechanism for smooth and consistent punching, a clippings tray to hold paper chips, a document separator for neat page management and an edge guide for accurate paper alignment before punching. It weighs 7.55kg and measures 430 x 330 x 410mm.

Key Features:

• Punch: 25 sheets per cycle on 70g A4 paper
• Bind: Up to 450 sheets per comb, for thick manuals and reports
• Holes: 21-hole, 14.3mm pitch, standard A4 comb format
• Build: Full metal split design, double handle, 7.55kg
• Accessories: Clippings tray, edge guide, document separator

Deli ET314 Comb Binding Machine Specifications:

25 Sheets Per Punch:

The ET314 punches up to 25 sheets of standard 70g A4 paper in a single cycle. For a 100-page document, you divide the pages into four 25-sheet batches and punch each batch, then assemble. This throughput is comfortable for typical office binding workloads. Double handle mechanism balances the punch force between both hands . Less effort per cycle than single handle machines . Since it is all metal, the handle action is consistent and solid with no flex or play in the mechanism, delivering clean, perfectly aligned holes in every batch.

450-Sheet Binding Capacity:

The ET314 binds documents up to 450 sheets thick using standard plastic comb rings. A 450-sheet document is approximately 45mm thick at standard paper weight, which covers everything from a 10-page monthly report at the thin end to a 450-page annual report or training manual at the maximum. For most everyday binding tasks in Kenyan offices, schools, and print shops, the 450-sheet capacity handles every document type that professional comb binding is suited for.

Metal Split Design:

The ET314 features a split design, where the punching mechanism and the comb-opening mechanism are housed in the same metal body. The all-metal construction ensures that the machine maintains its alignment and dimensional accuracy over thousands of binding cycles without the frame flexing or the punch holes gradually shifting out of alignment – a common failure mode on lighter plastic-bodied machines. The 14.3mm hole pitch matches the standard A4 comb ring spacing used by all major plastic comb ring suppliers in Kenya, ensuring that the ET314 is compatible with readily available replacement comb rings of any diameter.